JIANGSU TONGDE INTERNATIONAL TRADE CO.LTD.

davidcheng520@sina.com

+86-0523-18921730790

HomeProductsStamping PartsCustom Metal StampingWelded spiral serrated finned tube

Welded spiral serrated finned tube

$2.7 - 4.4 /Kilogram
Payment Type:
L/C,D/A,D/P,T/T
Incoterm:
FOB
Min. Order:
1000 Kilogram
Transportation:
Ocean,Land,Air,BY Express
Port:
ShangHai.China
Share:
  • Product Description
Overview
Product Attributes

BrandOEM

CertificationCe

Place Of OriginJiangsu, China

TypeFin Tube

ApplicationHeater Parts

Model Number15ftwese01

Supply Ability & Additional Information

PackagingOur Exporting Standard Packaging: PE Foam+Plastic Bag+Carton Box+Pallet; PE Foam+Plastic Bag+Wooden Box.

Productivity50000 per month

TransportationOcean,Land,Air,BY Express

Place of OriginJiangsu, China

Supply Ability50000 per month

CertificateInternational Automotive Task Force

PortShangHai.China

Payment TypeL/C,D/A,D/P,T/T

IncotermFOB

Packaging & Delivery
Selling Units:
Kilogram
Package Type:
Our Exporting Standard Packaging: PE Foam+Plastic Bag+Carton Box+Pallet; PE Foam+Plastic Bag+Wooden Box.

                                     Welded spiral serrated finned tube                                           

Product Description

 

1. Product brief
1.1.High frequency welded spiral finned tube is one of the most widely used finned tubes. It is a plain type fin, made by helically winding the fin strip on edge around the tube. The fin is continuously welded to the tube by a high frequency electrical resistance welding process which leaves the tube essentially unchanged metallurgically. The width of the weld is always greater than 90 percent of the thickness of the fin, assuring a strong bond between the fin and the tube for efficient heat transfer and long life. Solid fins are preferred in fouling applications. The finished finned tube is extremely strong mechanically and has greater resistance to bursting pressure than the bare tube due to the reinforcing effect of the fin. Because of its excellent strength and resistance to deformation, this tubes are well suited for applications where severe abuse is expected in service.
Our Welded Helical finned tubes consist of steel fins wrapped helically around steel pipe, and continuously welded using the GMAW process.  The fins may be either solid or serrated.
For Welded Helical Solid and Welded Helical Serrated finned tubes, the fin and tube materials can be any combination that can be welded together using the GMAW (gas-metal-arc-welding) process.
For Welded Longitudinal finned tubes, the fin and tube materials can be any combination that can be resistance welded together

 

2. Product main properties
No.ItemDescription
2.1Tubing outside diameter3/4" to 4"
2.2Tubing lengthUp to 30' standard.
2.3Number of fins per inch2 to 8
2.4Fin height3/8" to 1 1/2"
2.5Fin thickness0.015",0.02",0.03",etc.
2.6Tube wall thicknessMin 0.1"
2.7Fin materialCopper, Carbon Steel
2.8Tube material  Some Ferrous, Some Non-Ferrous, & Some Alloys
2.7Operating temperatureUp to 200ºC

 

Packaging & Shipping

 

3. Packing,Shipping and others
No.ItemDescription
3.1PackingTo be packed in wooden crate
3.2MarkingEach box to be legibly marked with the name of the manufacturer or supplier, the designation of material,condition,dimensions and weight
3.3Shipping toolsShip goods by van to departune port then by sea or air to desitination port

 

Welded spiral serrated finned tube

Welded spiral serrated finned tube

Company Information

 

4.Quality management and spot management
No.ItemDescription
4.1Quality control1. Quality assurance
a. Incoming material quality assurance; b. Process quality assurance; c. First sample quality assurance; d. Final quality assurance.
2. Process management-The right results are from the right process
a. Production process card control; b. Standard operational procedure;c.Job certification;d. Quality chart monitor.
3. Equipment and facility management
a. Periodic maintenance; b.Preventative maintenance.
4. Mold management
a. Mold life management; b.Periodic and preventative maintenance; c. Periodic inspection.
4.2Inspection ToolsAltimeter,Vernier caliper,Micrometer,3D coordinate measuring instrument
4.3Spot management"5S" management (sort,set in order,shine,standard,sustainable).

 

FAQ

 

5.1. What Type of Fin Should I Use?

 

The choice between Aluminum L-foot and the welded finned tubes (helical and longitudinal) is usually clear -- aluminum L-foot finned tubes are generally used in air-cooled applications with service temperatures below 400 degrees F. Within the aluminum L-foot category, the choice between solid fin and perforated fin is less clear, and depends upon whether you want to take advantage of the improved heat transfer efficiency claimed for perforated fin.

Within the welded fin types, our experience with customers indicates that the choice between helical fins and longitudinal fins generally depends on the direction of fluid flow across the fins, with the objective of having the fluid pass between the fins, rather than across the fins. For example, in the case of a tank heater, fluid flow is caused by convection currents within the tank -- as the fluid next to the finned tube is heated, it rises vertically, and the colder fluid near the top of the tank drops vertically. Therefore if a tank heater is to be installed with the finned tubes oriented vertically, Longitudinal Finned Tube may be the best choice, since the rising fluid will pass in a direction parallel to the longitudinal axis of the tube, and between the fins. However if the heater is to be installed horizontally, helical fins may be the best choice, since the fluid flow would be perpendicular to the axis of the tube, and between the helical fins.

If the choice is for welded helical finned tubes, a further decision is required -- Helical Solidor Helical Serrated? ...

- For some tube/fin configurations, helical serrated gives greater surface area than solid, and for other tube/fin configurations the reverse is true. A comparison of surface area may be made by using the tables included in Design Info.

- A definite advantage of helical serrated is that for a given pipe size, a greater fin height can be used for serrated than for solid. This is because the serrations, or cuts, in the fin strip allow a greater fin strip width to be formed around a given size tube without significant deformation of the fin.

- It has been claimed that helical serrated offers an advantage over helical solid, particularly for lighter fluids, in that the serrated segments allow some lateral (cross-fin) flow of fluid along the tube axis, which serves to increase turbulence, thereby breaking up the thermal boundary layer and increasing heat transfer efficiency; and also slows the formation of fouling deposits between fins.

The decision which type of fin to use is yours -- Metalli stands ready to provide any type of finned tube you need.

 

5.2. Why Use Finned Tubes?

 

Finned tubes are used in applications involving the transfer of heat from a hot fluid to a colder fluid through a tube wall. The rate at which such heat transfer can occur depends on three factors: (1) the temperature difference between the two fluids; (2) the heat transfer coefficient between each of the fluids and the tube wall; and (3) the surface area to which each fluid is exposed. In the case of a bare (unfinned) tube, where the outside surface area is not significantly greater than the inside surface area, the fluid with the lowest heat transfer coefficient will dictate the overall heat transfer rate. When the heat transfer coefficient of the fluid inside the tube is several times larger than that of the fluid outside the tube (for example steam inside and oil outside), the overall heat transfer rate can be greatly improved by increasing the outside surface area of the tube. In mathematical terms, the product of heat transfer coefficient for the outside fluid multiplied by outside surface area is made to more closely match the product of the inside fluid heat transfer coefficient multiplied by tube inside surface area.

So the whole concept of finned tubes is to increase outside surface area. As an example, a common finned tube configuration of 2" (nominal) pipe with 3/4" high welded helical solid fins of 12 gauge thickness with 6 fins per inch has an outside surface area of 8.23 sq. ft. per linear foot; whereas the same bare pipe has an outside surface area of only 0.62 sq. ft. per linear foot. (See Design Info for extensive tables of surface areas and fin weights.)

The advantage of finned tubes is that by increasing overall heat transfer rate, the total number of tubes required for a given application is reduced, thereby also reducing overall equipment size and decreasing the cost of the project. In many application cases, one finned tube replaces six or more bare tubes at less than 1/3 the cost and 1/4 the volume.

 

5.3. What Materials Are Used for Finned Tubes?

 

For Aluminum L-Foot finned tubes, the fin material is aluminum, either 1100-0 or 5005. The tube material is generally carbon steel, stainless steel, or brass; however the tube can be of any material.

For Welded Helical Solid and Welded Helical Serrated finned tubes, the fin and tube materials can be any combination that can be welded together using the GMAW (gas-metal-arc-welding) process.

For Welded Longitudinal finned tubes, the fin and tube materials can be any combination that can be resistance welded together.

The materials chosen for a given application are a function of service temperature, corrosive environment, and/or erosive environment. Common tube materials used for our welded product lines include: carbon steel, carbon moly, chrome moly, stainless steel, Inconel, and Incoloy. Common fin materials include: carbon steel; stainless steels of types 304, 310, 316, 321, 409, and 410; Nickel 200, and Inconel.

Product Categories : Stamping Parts > Custom Metal Stamping

Email to this supplier
  • *Subject:
  • *To:
    Mr. Davidcheng
  • *Email:
  • *Message:
    Your message must be between 20-8000 characters
HomeProductsStamping PartsCustom Metal StampingWelded spiral serrated finned tube
Send Inquiry
*
*

Home

Product

Phone

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send